Product Experts Available 1-800-252-7427

Filter Your Result

  1. Remove This Item Category: Fuel Systems
CATEGORY
  1. Accelerator (2)
  2. Carburetor Cables and Linkage (2)
  3. Carburetors (3)
  4. Fuel Injectors (1)
  5. Fuel Pumps and Related (1)
  6. Fuel System Hardware (2)
  7. Gas Caps (1)
  8. Gas Pedals and Pads (2)
  9. Gas Tanks (6)
  10. Throttle Bodies (1)
PRICE RANGE
  1. (7)
  2. (3)
  3. (2)
  4. (3)
  5. (3)
 

1960 FORD RANCHERO FUEL SYSTEMS

Search Term: 'All Parts'
Category: 'Fuel Systems'
Vehicle: '1960 FORD RANCHERO'
18 Item(s) Show per page Grid  List 
FiTech Fuel Injection 600 HP Basic Kit, Matte Black Part # 90-376706-1
Replaces Your Single 4 Barrel Carburetor With Precise Fuel Injection Technology Works With Factory Or Aftermarket Single 4-Barrel Intake Manifolds & Air Cleaner Assemblies  Eliminates Hard Starting, Sputtering, Cold Start Warmups, & Interior Fuel Smell  Instant Starting  & Throttle Response (Even After Long Term Storage) Improves Mileage, Offers Superior All-Climate Drivability Wet Flow "Swirl" Fuel Technology Increases Performance Over Other Designs Self Tunes In Minutes With No Laptop Tuning Required Voltage Fuel Pump Control Reduces Fuel Pump Heat & Extends Life Uses Same Throttle & Transmission Linkage As 4150 Holley Carburetors Idle Compensates For A/C (If Equipped) So No A/C Solenoid Is Required GM Style Sensors Can Be Replaced Locally At Most Auto Parts Stores Integrated OBD-II Style Diagnostics, Limp Home Mode Allows You To Drive Should A Sensor Fail   Never buy a carburetor again! FiTech Fuel Injection is dedicated to engineering, developing, and producing the most advanced and affordable electronic fuel injection systems on the planet. This system replaces your single 4-barrel carburetor with precise fuel injection technology. It works with factory or aftermarket single 4-barrel square bore intake manifolds air cleaner assemblies. You will enjoy the way it eliminates hard starting, sputtering, cold start difficulty, and interior fuel smell. Also unlike a carburetor you will see instant starting & throttle response, even after long term storage along with improved mileage and superior all-climate driveability. This system is so advanced that it self-tunes in minutes with no laptop required. It is truly an investment in the future enjoyment and reliability of your vehicle!   Notes: Requires Separate Fuel Pump System Purchase, NOT Included - See Fuel Command Center Under Related Items (All The Benefits Of An In-Tank Fuel Pump Without Modifying Your Fuel Tank! SPECIFICATIONS: Quality Level: High Performance Upgrade Throttle Body Construction: Die Cast Aluminum Color: Matte Black Metering Style: Speed Density Throttle Body Mounting Flange: 4-Barrel Square Bore, Same As Autolite 4100 Venturi Qty: 4 Injector Quantity: 8 Fuel Inlet Locations: 3 Timing Control: Yes Max Flywheel Horsepower: 800 Supports Forced Induction & Nitrous: No Self Tuning: Yes, In Minutes...Just Answer A Few Questions On Touch Screen Display Laptop Tuning: Yes Fuel Pump / System Included: No What's In The Box: Throttle body, Fuel Rails w/-06AN Fuel Inlet Fitting, Fuel Injectors, ECM With Calibration Module, Handheld Touch Screen 8 GB Memory Controller w/Windshield Mount, Plug N Play Wiring Harness, Bosch 4.2 Wide Band 02 Sensor,  Clamp On 02 Bung Kit, Fuel Pressure Regulator, GM Type 2.5 BAR MAP Sensor, GM Type TPS Sensor, GM Type IAC Motor, GM Type Coolant Temperature Sensor, GM Type Adjustable Control Fan Switch, A/C Kickup Control Kit, Gasket Kit, Step By Step Instruction.   Manufacturer Limited Warranty: 1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight: 11 lbs. Product Dimensions: 14 x 12 x 8  50-State Emission Legal: No Learn More
$1,000.99 Kit
1955-1979 Ford And Mercury Gas Tank Sending Unit Brass Hollow Float Part # 90-44344-1
  We have an exact reproduction brass gas tank float available for all 1960/1979 fuel sending units. Made in the usa! Learn More

Was: $6.95 ea.

Now: $6.49 ea.

1960-1979 Ford And Mercury Gas Tank Sending Unit O Ring Part # 90-44209-1
Eckler's Select Series   Small gasket that mounts between the fuel sender and retaining ring used on all models from 60/79.   Learn More
$3.49 ea.
Accelerator Pedal, Molded Rubber Over Metal Part # 90-29980-1
OE # B7A-9735-A Replacement Made Out Of Metal Coated With Rubber Fits And Functions Like The Original   This pedal is a reproduction of one version seen on original cars. The other version is solid plastic. EIther will work fine. To the casual observer at a car show both look the same. Count on Dearborn Classics to help you feel like owning your pride and joy is a gas! Learn More
$14.49 ea.
1960-1979 Ford And Mercury Gas Tank Sending Unit Lock Ring Part # 90-44349-1
Reproduction Of Original Cadmium-Plated Stamped Steel   New sending unit locking rings for your classic Ford. Correct stamped steel reproductions are made to match the original exactly. Learn More

Was: $9.95 ea.

Now: $7.99 ea.

Gas Tank Sending Unit Part # 90-34569-1
Includes:  Filter screen, brass float, lock ring and " 0" ring. We carry both original Ford and reproduction fuel sending units. Reproductions are made to match the original exactly. Learn More
$66.99 ea.
1960-69 Falcon-Ranchero-Comet-Fairlane Locking Gas Cap With 2 Keys, Bright Finish Part # 90-36647-1
New Locking Style Gas Cap Made Of Sturdy, High Quality Materials Prevents Unauthorized Access To Gas Tank Prevents Malicious Tampering Of Gasoline Prevents Gasoline Theft Includes Two Keys For Locking Bright Polished Finish Gives Piece Of Mind And Provides Extra Safety For Non-Vented Applications Only   Old gas caps need to be replaced, especially when they've been through decades of constant exposure to harsh petrol chemicals and damaging environmental factors... or if they've just simply been stolen! Replace your worn-out (or stolen) gas cap with this brand-new locking gas cap to prevent any future tampering, theft or unauthorized access, all while ultimately increasing your Ford's safety. It's made of high-quality materials, has a bright polished finish, and includes two keys for locking it down for maximum security. It's very easy to use and functions just like an original OEM unit, so there's no surprises or guessing games how to use it. Just turn the key and lock!  Take control over who is accessing your fuel tank and get some piece of mind knowing your gas tank is virtually tamper-proof. You can count on Dearborn Classics to keep your Ford or Mercury on the road, and your gas cap where it should be! Learn More
$20.99 ea.
Fuel Tank Float, Solid Design, Ford & Mercury, 1959-1972 Part # 90-88693-1
Original style brass fuelk sending unit float is available to replace your original. This part is a special solid design that is superior to the original. Made in the usa! Learn More

Was: $9.99 ea.

Now: $5.95 ea.

Accelerator Pedal Rod To Firewall Seal - Black Foam Rubber Part # 90-29981-1
New rubber gas pedal rod seals are now in stock for 1959 through 1964 Galaxies. These are the the small round rubber seals that wrap around the your accellerator rod at the firewall. Learn More
$4.99 ea.
Fuel Pump - Dual Action Part # 90-44601-1
Choose from our selection of quality american made fuel pumps. Includes gaskets with each pump. Manufactured in the usa! Brand new  fuel pumps are the highest quality and most correct choice for your restoration. This fuel pump is used for vacuum wipers from 1960/1962. Learn More
$110.99 ea.
Carburetor Spacer Throttle Lever Pivot Shaft Assembly, 6 Cylinder, Falcon, Ranchero, Comet, 1960-1968 Part # 90-74573-1
Fits 144, 170, & 200 Inline 6 Cylinder Motors Includes (1) Shaft & (1) E-Clip Made In The U.S.A. This is the throttle lever pivot shaft assembly that screws into the 6 cylinder carburetor spacer part number 63-40005. Make sure to purchase the carburetor spacer first. NOTE: This Throttle Lever Pivot Shaft Assembly Screws Into The Carburetor Spacer That Will Fit All Ford 144, 170, & 200 Cubic Inch Inline 6's Made From 1960 Through January 1968 That Have A 1 Barrel Carburetor. Learn More
$17.99 Kit
Carburetors, 390/406, Tri Power Part # 90-80701-1
Quality Reproduction Parts Brand New Carburetors - Not Rebuilt! Replacement For Originals Found On  Factory 3x2 FE Engines Useful On Modified 3x2 Set Ups Similar To Original Type This brand new set of carburetors has a big advantage over the originals they are intended to replace: the flow curve has been changed to correct the infamous off-idle stumble. They are also built to work with modern fuels. You will love the reliability and power they provide. Learn More
$1,865.99 Set
Ranchero OE Type Gas Tank Filler Pipe, 1960-1963 Part # 90-93995-1
Quality Restoration Part Faithful Reproduction Of The Original Easy To Install In-Tank Gas/Fuel Sender Also Available Time and the elements are tough on the original fuel tank filler pipes. This very nice reproduction will be like starting over and is very simple to change. We also offer brand-new fuel senders right here at MAC's! Learn More
$41.99 ea.
Carburetor Linkage, 3 x 2 Carburetors, Small Block Part # 90-88696-1
Quality Restoration Part Duplicate Of Originals Found On  Factory 3x2 Small Blocks Made On Original Tooling Useful On Modified 3x2 Set Ups Similar To Original Type This linkage set gives you the adjustability to achieve proper operation of your 3 x 2 set up.  It is correct for original 3 x 2 barrel cars with accurate plating and attachment points.  If you have a non-original 3 x 2 set up similar to what Ford sold this linkage set can typically be modified to work.   Learn More
$150.95 ea.
Carburetor Linkage Rod, 2 x 4 Carburetors, Small Block Part # 90-80707-1
Quality Restoration Part Duplicate Of Original Found On  Factory 2x4 Small Blocks Useful On Modified 2x4 Set Ups Similar To Original Type This is a single rod for non-reversed carburetors.  This adjustable rod connects the two carbs together.  It is correct for original 2 x 4 barrel cars with accurate plating and attachment points.  If you have a non-original 2 x 4 set up similar to what Ford sold this rod can typically be modified to work.   Learn More
$150.95 ea.
Carburetors 2 X 4 427 Part # 90-81268-1
Quality Reproduction Parts Brand New Carburetors - Not Rebuilt! Replacement For Originals Found On  Factory 2x4 427 Engines Useful On Modified 2x4 Set Ups Similar To Original Type This brand new set of carburetors has a big advantage over the originals they are intended to replace: the flow curve has been changed to correct the infamous off-idle stumble. They are also built to work with modern fuels. You will love the reliability and power they provide. Learn More
$1,948.99 Set
Brake & Fuel Line Combo Clip Part # 90-88704-1
Combination fuel and brake line clip used on frame rails where both lines run along frame. Use on many models, check your application for quantity. Learn More
$2.49 ea.
Fuel Line Frame Clip,3/8" Part # 90-74577-1
Attaching frame clip is 3/8" And designed for fuel lines. Learn More
$2.49 ea.
18 Item(s) Show per page Grid  List