Eckler’s is open, shipping and ready to meet all of your automotive needs. Learn More

Dearborn Classics warehouse is open, shipping daily and ready to meet all of your automotive needs. Learn More

Product Experts Available 1-800-252-7427

Filter Your Result

  1. Remove This Item Category: Transmission and Driveline
CATEGORY
  1. Automatic Transmissions (14)
  2. Clutches (13)
  3. Differentials (18)
  4. Drive and Axle Shafts (6)
  5. Flywheel and Related (2)
  6. Manual Transmissions (10)
  7. Transmission Shifters (4)
BRAND
  1. (3)
  2. (2)
PRICE RANGE
  1. (15)
  2. (9)
  3. (11)
  4. (9)
  5. (15)
  6. (4)
 

1962 MERCURY TRANSMISSION AND DRIVELINE

Search Term: 'All Parts'
Category: 'Transmission and Driveline'
Vehicle: '1962 MERCURY'
Items 1 to 24 of 63 total Show per page Page:
  1. 1
  2. 2
  3. 3
  4. Next Page
Grid  List 
1960-1969 Ford Clutch Assembly Kit, 8.5" For 144, 170, and 200 6-Cylinder Engines Part # 90-75455-1
Complete Pressure Plate, Disc, Throw Out Bearing And Installation Kit 8.5" Disc Fits 1960-64 Falcon 2.4L 144 Fits 1961-69 Falcon 2.8L 170 Fits 1965-69 Falcon 3.3L 200 Fits 1961-65 Ranchero 2.8L 170 Fits 1960-64 Mercury Comet 2.4L 144, 2.8L 170   Learn More
$236.99 Kit
Centerforce 11" Clutch Disc And Pressure Plate Kit Part # 90-75461-1
High-Quality Upgrade Includes 11" Organic Clutch Disc And Pressure Plate 1-1/16" Diameter Shaft 10 Spline   New centerforce brand clutch sytems are the best performing clutches you can buy for your classic Ford. Allows for stock installation with unparalleled frictional performance without heavy pedal feel. Performs better than stock clutches due to the use of centrifugal force which actually increases holding power as rpm increases. Offers 30% more holding capacity than a stock original equipment clutch. This pressure plate is 11" In diameter. This works for v-8 engines only. Learn More
$339.99 Kit
Centerforce Clutch Disc And Pressure Plate Kit, V8 Engines Part # 90-75460-1
High-Quality Upgraded Set Includes 10" Organic Clutch Disc And Pressure Plate For 1 1/16 in. Diameter Shaft, 10-Spline Found On Some 6 Cylinder And Many Small-Block V-8s Correct For Some 352s   New Centerforce brand clutch systems are the best performing clutches you can buy for your classic Ford.  Allows for stock installation with unparalleled frictional performance without heavy pedal feel.  Performs better than stock clutches due to the use of centrifugal force which actually increases holding power as rpm increases.  Offers 30% more holding capacity than a stock original equipment clutch. This disc and pressure plate are 10" in diameter. Learn More
$387.99 Kit
Overdrive Handle - Chrome Plated Die-Cast - Includes Set Screw Part # 90-25038-1
Reproduction Of Original Includes Set Screw Overdrive Lettering In Handle Fits 221, 260 & 289 V8 Learn More
$24.49 ea.
9 Diff Overhaul Kit - Lm102910 Part # 90-85064-1
Our overhaul kits are the most complete kits available. Each kit only uses timken bearings and high quality seals. Each kit contains two pinion bearings, two carrier bearings, pinion depth shims, pinion seal, pinion nut, crush sleeve, pinion support bearing, ten ring gear bolts, gasket, marking compound and lock tite. You won't have to make a special trip to the auto parts store, everything is provided. The Ford 9" Differential used different carrier bearings. Check the bearings on your existing differential for a number starting with lm, have this number ready when you order.The Ford 9" Differential used different carrier bearings. Have the customer check the bearings on their existing differential for a number starting with lm, order the kit accordingly:lm102910 - dfo100alm501310 - dfo100blm603011 - dfo100c Learn More

Was: $306.99 Kit

Now: $273.99 Kit

9 Diff Overhaul Kit - Lm501310 Part # 90-85065-1
Our overhaul kits are the most complete kits available. Each kit only uses timken bearings and high quality seals. Each kit contains two pinion bearings, two carrier bearings, pinion depth shims, pinion seal, pinion nut, crush sleeve, pinion support bearing, ten ring gear bolts, gasket, marking compound and lock tite. You won't have to make a special trip to the auto parts store, everything is provided. The Ford 9" Differential used different carrier bearings. Check the bearings on your existing differential for a number starting with lm, have this number ready when you order.The Ford 9" Differential used different carrier bearings. Have the customer check the bearings on their existing differential for a number starting with lm, order the kit accordingly:lm102910 - dfo100alm501310 - dfo100blm603011 - dfo100c Learn More
$299.99 Kit
Ford 8 Inch Differential Overhaul Kit Part # 90-85067-1
Complete 8" Differential Overhaul Kit For Open Or Factory Limited Slip Everything You Need Is Included   Our overhaul kits are the most complete kits available. Each kit only uses Timken bearings and high quality seals. Each kit contains two pinion bearings, two carrier bearings, pinion depth shims, pinion seal, pinion nut, crush sleeve, pinion support bearing, ten ring gear bolts, gasket, marking compound and lock tite. You won't have to make a special trip to the auto parts store, everything is provided. This kit works for factory open differentials or limited slip units. Learn More
$281.99 Kit
8 Diff Overhaul Kit - Limited Part # 90-85068-1
Our overhaul kits are the most complete kits available. Each kit only uses timken bearings and high quality seals. Each kit contains two pinion bearings, two carrier bearings, pinion depth shims, pinion seal, pinion nut, crush sleeve, pinion support bearing, ten ring gear bolts, gasket, marking compound and lock tite. You won't have to make a special trip to the auto parts store, everything is provided.This kit works for auburn, true-trac, and trac-loc aftermarket Limited slips. For factoy units, use dkf101. Learn More

Was: $433.99 Kit

Now: $399.99 Kit

Rear Axle/Rear Wheel Bearing Retainer Gasket Part # 90-24710-1
Replacement Of Original Fits 1949-1952 Full Size Ford & 1963-1964 Falcon V8 Learn More
$1.99 ea.
Column Shift Knob Insulator - Black Rubber Part # 90-31049-1
Replace your worn original rubber gear shift insulator with our new american made reproduction. Fits at the bottom of the shifter arm where the arm meets the shift collar. Learn More
$4.99 ea.
1960-1978 Ford And Mercury Clutch Pedal Rod Nylon Bushings, 3/8" ID Part # 90-44334-1
  Now you can get rid of the annoying squeak in your clutch pedal for your 1960-1971 Galaxie,Falcon, 1962-1972 Fairlane, 1964-1973 Mustang, and 1961-1977 F-100/F-350. Requires At Least 2 Per Vehicle Learn More
$5.99 PR
Transmission Floor Shift Boot - Round With Flat Side Part # 90-34427-1
Original and reproduction shift boots are available for your four speed Ranchero, Torino, Falcon or Fairlane. Fits all v-8 cars. On cars with consoles, this will serve as the bottom boot. Learn More
$36.99 ea.
Transmission Pan Gasket - Ford-O-Matic 2 Speed Transmission Part # 90-31352-1
Fits Ford with Ford-O-Matic 2 speed only 59 Ford Ford-O-Matic 2 Speed Transmission 60-64 Ford Ford-O-Matic 2-Speed 62-64 Fairlane/Torino Ford-O -Matic 2-Speed Transmission 60-64 Falcon/Comet With Ford-O-Matic Learn More
$11.99 ea.
Clutch Pedal Spring Insulator - U-Shaped Part # 90-33337-1
New clutch pedal spring insulator for 1960-1968 Ford, 1962-1968 Fairlane, 1960-1968 Falcon, and 1965-1972 f100/f350 Trucks. Learn More
$5.99 ea.
Clutch Pedal Retracting Spring Part # 90-34430-1
Now available is the correct clutch pedal return spring for 1960 through 1964 Galaxies, 1962 through 1965 Fairlane, 1960 through 1965 Falcon/ Ranchero, and 1966 through 1968 Mustang. No need to use a universal spring again. Learn More
$13.99 ea.
Clutch Fork Rod Insulator - Rubber Part # 90-35438-1
This little rubber bushing fits between the z-bar (clutch equalizer bar) and the clutch pedal rod. The insualtor fits where the two parts meet. There are 2 required per car.Made in the u.S.A.This little rubber bushing fits between the z-bar (clutch equalizer bar) and the clutch pedal rod. The insualtor fits where the two parts meet. There are 2 required per car.Made in the u.S.A. Learn More
$3.49 ea.
Floor Shift Boot Retainer - Round - Chrome Part # 90-34423-1
We are proud to offer quality shift boot rings for manual transmission Rancheros, Falcons, Torinos, and Fairlanes. Also fits Galaxie without console. (does not come with mounting screws) Learn More
$44.99 ea.
Shift Selector Dial - 2-Speed Ford-O-Matic Transmission Part # 90-44452-1
Please note that this is a 2 speed transmission indicator lens. This is a lens with letters of "P" For park, "R" For revers, "N" For neutral, "D" For drive, and "L" For low gear. Letters are in white on clear plastic. Learn More
$28.99 ea.
Transmission Mount - With Cantilever - 144, 170 and 200 6 Cylinder - 260 and 289 V8 Part # 90-33589-1
Choose from our selection of orignal replacement transmission mounts. Come applications not listed can be special ordered, please call for availability. This is for Falcons after 4/15/61 with cantilever lower mount. For 6 cyl., and v8 applications. For Fairlane with 289 v8 use part #trm100. Use part #trm104 with 260 v8 engines. This is used in addition to cantilever rear lower mount, sold separately. We suggest part #trm103c. Learn More
$32.99 ea.
61/65 Ranchero/Falcon Trans. Conversion Mount Part # 90-75454-1
This special steel conversion mount will allow for installation of the later model c-4 transmission into late 1961 on up through 1965 Rancheros, Falcons and Comets. This mount will not work in the 1961 Falcons with the frame to frame transmission mount. Can be used on both v8 and six cylinder applications. Made in the usa! Learn More
$104.99 ea.
Column Shift Lever Part # 90-44592-1
New reproduction of the original gear shift lever arm used on 1960/1965 Falcons and Rancheros. Knob not included. Order separately part #ikn101. This is for automatic only. This will fit on the 64/65, but white handle was used up until 1963 only. Learn More
$57.99 ea.
Items 1 to 24 of 63 total Show per page Page:
  1. 1
  2. 2
  3. 3
  4. Next Page
Grid  List