Eckler’s is open, shipping and ready to meet all of your automotive needs. Learn More

Dearborn Classics warehouse is open, shipping daily and ready to meet all of your automotive needs. Learn More

Product Experts Available 1-800-252-7427

Filter Your Result

  1. Remove This Item Category: Transmission and Driveline
  2. Remove This Item Category: Clutches
CATEGORY
  1. Clutch Assemblies (3)
  2. Clutch Discs and Pressure Plates (9)
  3. Clutch Forks and Throw-out Bearings (9)
  4. Clutch Hardware (6)
  5. Clutch Pedal and Pads (5)
  6. Clutch Rods and Boots (6)
BRAND
  1. (1)
  2. (5)
  3. (1)
  4. (4)
  5. (1)
PRICE RANGE
  1. (10)
  2. (8)
  3. (6)
  4. (6)
  5. (5)
 

1963 FORD CLUTCHES

Search Term: 'All Parts'
Category: 'Clutches'
Vehicle: '1963 FORD'
Items 1 to 24 of 35 total Show per page Page:
  1. 1
  2. 2
  3. Next Page
Grid  List 
Equalizer Bar Repair Kit Part # 90-33560-1
Repair your worn bushings with this new kit. Our kit includes the felt washers, nylon ball bushings, washer and clevis clips. This is what you need to improve clutch operation for 1962/1971 Rancheros, Falcons, Fairlanes and Torinos with manual transmission and small block v-8. Will not work for 66 Ranchero. Learn More
$11.99 Kit
Equalizer Bar Repair Kit Part # 90-38969-1
Now available is the z-bar stud that screws into the side of your small block that the z-bar pivots on. Comes complete with bushing,clip,felt and washer. Learn More
$14.99 Kit
1960-1969 Ford Clutch Assembly Kit, 8.5" For 144, 170, and 200 6-Cylinder Engines Part # 90-75455-1
Complete Pressure Plate, Disc, Throw Out Bearing And Installation Kit 8.5" Disc Fits 1960-64 Falcon 2.4L 144 Fits 1961-69 Falcon 2.8L 170 Fits 1965-69 Falcon 3.3L 200 Fits 1961-65 Ranchero 2.8L 170 Fits 1960-64 Mercury Comet 2.4L 144, 2.8L 170   Learn More
$236.99 Kit
Ford Clutch Assembly Kit,10",1963-74 Part # 90-75457-1
Complete Pressure Plate, Disc, Throw Out Bearing And Installation Kit Fits Falcon 1963-64 4.3L 260, 1968-70 5.0L 302 Fits Fairlane 1969-74 4.1L 250, 5.0L 302, 1963-64 3.6L 221 Fits Galaxie 1969-73 5.7L 350, 5.8L 351 Fits Ranchero 1968-74 5.0L 302 Fits Comet 1963-64 3.6L 221, 4.3L 260,1966-68 4.7L 289, 1968-74 5.0L 302 Fits Montego 1969-73 4.1L 250, 1968-74 5.0L 302 3 Speed Learn More
$216.99 Kit
Centerforce 11" Clutch Disc And Pressure Plate Kit Part # 90-75461-1
High-Quality Upgrade Includes 11" Organic Clutch Disc And Pressure Plate 1-1/16" Diameter Shaft 10 Spline   New centerforce brand clutch sytems are the best performing clutches you can buy for your classic Ford. Allows for stock installation with unparalleled frictional performance without heavy pedal feel. Performs better than stock clutches due to the use of centrifugal force which actually increases holding power as rpm increases. Offers 30% more holding capacity than a stock original equipment clutch. This pressure plate is 11" In diameter. This works for v-8 engines only. Learn More
$339.99 Kit
Ford Clutch Assembly Kit,11",1962-74 Part # 90-75458-1
Complete Pressure Plate, Disc, Throw Out Bearing And Installation Kit Fits Falcon 1968-70 5.7L 351 Fits Fairlane 1968-73 5.7L 351, 1966-69 6.4L 390 2 Barrel Carb Fits Galaxie 69-73 5.7L 350, 5.8L 351,1963-71 6.4L 390, 1962-63 6.6L 406 Fits Ranchero 1970-74 5.7L 351, 1967-69 6.4L 390 Fits Comet 1968-73 5.7L 351, 1966-69 6.4L 390, Fits Montego 1969-74 5.7L 351, 1967-69 6.4L 390 2 Barrel Carb Learn More

Was: $189.99 Kit

Now: $167.99 Kit

Centerforce Clutch Disc And Pressure Plate Kit, V8 Engines Part # 90-75460-1
High-Quality Upgraded Set Includes 10" Organic Clutch Disc And Pressure Plate For 1 1/16 in. Diameter Shaft, 10-Spline Found On Some 6 Cylinder And Many Small-Block V-8s Correct For Some 352s   New Centerforce brand clutch systems are the best performing clutches you can buy for your classic Ford.  Allows for stock installation with unparalleled frictional performance without heavy pedal feel.  Performs better than stock clutches due to the use of centrifugal force which actually increases holding power as rpm increases.  Offers 30% more holding capacity than a stock original equipment clutch. This disc and pressure plate are 10" in diameter. Learn More
$387.99 Kit
1963-1974 Ford & Mercury Various Models Centerforce 11" 10 Spline Clutch Disc And Pressure Plate Kit, Dual Friction Part # 90-858162-1
Used On A Variety Of Engine/Transmission Combinations Light Pedal Effort High Quality Friction Material Increased Holding Capacity Smooth Engagement   The Centerforce Dual Friction Clutch Series is a performance matched pressure plate & disc combination featuring the patented Centerforce centrifugal weight system and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the Centerforce Dual Friction disc has an organic full facing on one side for longevity and an organic segmented facing on the other side providing increased holding capacity. Some applications have the organic segmented facings of both sides.The Dual Friction clutch is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control. While the Dual Friction has been engineered primarily as a street clutch it can be used in mild competition applications. Product Specifications: Torque Capacity: 471 - FT/LB SFI: Not Approved Clutch Disc Diameter: 11 - IN Input Shaft Diameter: 1-1/16 - IN Input Spline Quantity: 10 Disc Material: Organic/Carbon composite Disc Type Sprung Solid: Sprung Disc Type: Full face/Segmented face Material: Cast Iron Pressure Plate / Full Face and Segmented Organic Friction Counterweight Assist: Yes Clutch Bolt Pattern: 5 Flywheel Step Type: Flat Manufacturer Description: Dual Friction, Clutch Pressure Plate and Disc Set Kit Includes: Pressure Plate, Disc, Alignment Tool Learn More
$458.99 Kit
Centerforce 11.5" Clutch Disc And Pressure Plate Kit, Heavy Duty Part # 90-75462-1
New centerforce brand clutch sytems are the best performing clutches you can buy for your classic Ford. Allows for stock installation with unparalleled frictional performance without heavy pedal feel. Performs better than stock clutches due to the use of centrifugal force which actually increases holding power as rpm increases. This kit is the dual friction pressure plate and disc which offers 90% more holding power than a stock system. This clutch/disc set is designed for use with engines producing high horsepower and torque and is suitable for heavy cars and four wheel drives. All centerforce clutches are designed for smooth engagement and light pedal feel without compromising high performance. O.E.M. Clutch may be 11 1/2 " In diameter. This works for W8 engines only. 1966/67 Fairlane 390GT, 1967/69 Fairlane 427, 1969 Fairlane 428, 1970 Fairlane 429, 1965/71 Galaxie 427, 1966/68 Galaxie 428, 1969/70 Galaxie 429, 1969 Torino 428, 1970/71 Torino 429, 1969/70 Cobra jet 428, 1971 Cobra jet 429. Use P/N 63-17813 for correct throw-out bearing.   Learn More
$519.99 Kit
1960-1978 Ford And Mercury Clutch Pedal Rod Nylon Bushings, 3/8" ID Part # 90-44334-1
  Now you can get rid of the annoying squeak in your clutch pedal for your 1960-1971 Galaxie,Falcon, 1962-1972 Fairlane, 1964-1973 Mustang, and 1961-1977 F-100/F-350. Requires At Least 2 Per Vehicle Learn More
$5.99 PR
Clutch Fork Anti-Rattle Spring Part # 90-39302-1
This spring is mounted on the clutch fork and helps prevent rattle when the clutch is not engaged. Replace your worn out original with this previoulsy unavailable piece.Fits 65/71 Galaxie, Torino, and Falcon with 6 and 8 cylinder engines. Learn More
$3.99 ea.
Clutch Pedal Spring Insulator - U-Shaped Part # 90-33337-1
New clutch pedal spring insulator for 1960-1968 Ford, 1962-1968 Fairlane, 1960-1968 Falcon, and 1965-1972 f100/f350 Trucks. Learn More
$5.99 ea.
Clutch Pedal Retracting Spring Part # 90-34430-1
Now available is the correct clutch pedal return spring for 1960 through 1964 Galaxies, 1962 through 1965 Fairlane, 1960 through 1965 Falcon/ Ranchero, and 1966 through 1968 Mustang. No need to use a universal spring again. Learn More
$13.99 ea.
Clutch Fork Rod Insulator - Rubber Part # 90-35438-1
This little rubber bushing fits between the z-bar (clutch equalizer bar) and the clutch pedal rod. The insualtor fits where the two parts meet. There are 2 required per car.Made in the u.S.A.This little rubber bushing fits between the z-bar (clutch equalizer bar) and the clutch pedal rod. The insualtor fits where the two parts meet. There are 2 required per car.Made in the u.S.A. Learn More
$3.49 ea.
Clutch Fork Dust Boot - 6 Cylinder and V8 With 3.03 Design Ford 3-Speed Or Warner 4-Speed Part # 90-35365-1
This is the molded rubber black boot that installs on the bell housing and helps seal your bellhousing where the clutch fork extends through. Protects your clutch from damaging road debris. Measures 3 5/8 x 3 1/16 x 1. Learn More
$14.49 ea.
Clutch Fork Dust Boot - Rubber Part # 90-35907-1
This is the molded rubber black boot that installs on the bell housing. Protects your clutch from damaging road debris. Fits 144/170 6 cylinder engines. Measures 2 7/8 x 2 13/16 x 2. Learn More

Was: $29.95 ea.

Now: $16.99 ea.

Full-Size Ford/Mercury Clutch Pedal Rod Seal, Rubber, 1963-1964 Part # 90-35437-1
Clutch Pedal Rod Seal Correct Rubber Reproduction Sold Individually Made In The U.S.A.   Dearborn Classics offers you this quality reproduction, OEM-correct clutch pedal rod seal made specifically for your classic Ford and features original sizing and length. You can count on Dearborn Classics for all of your classic Ford needs. Learn More
$49.99 ea.
Manual Transmission Clutch Fork Bracket - L-Shaped Part # 90-31351-1
Reproduction Of Original 60-68 Ford - Before 2-15-68 63-68 Mercury - Before 2-15-68 62-68 Fairlane/Torino - V8 - Before 2-15-68 63-68 Falcon - V8 - Before 2-15-68 65-66 Comet - 10" Clutch - 6 Cylinder - Before 2-15-68 65-68 Comet - V8 - Before 2-15-68 Learn More
$17.99 ea.
Clutch Pedal Spring Insulator - 3/8" Long, 1/4" Between Legs Part # 90-33616-1
New for 2008 is an injection molded plastic insulator that stops underdash squeaking from clutch pedal return spring. 2 required per car. 6 and 8 cylinder"U" Shaped-3/8" Long 5/64" Thick, 1/4" Between legs. Learn More
$5.99 ea.
Equalizer Bar - V8 Part # 90-35668-1
Correct reproduction of the original clutch equalizer bar used in 63/65 Rancheros and Falcons with factory 4 speed transmission and eight cylinder. Made to match the original fit exactly. Learn More
$79.99 ea.
Clutch Fork Part # 90-35666-1
Brand new stamped steel clutch forks are available for several models. Be sure to check your application and length to identify correct model for your car. Learn More
$67.99 ea.
Items 1 to 24 of 35 total Show per page Page:
  1. 1
  2. 2
  3. Next Page
Grid  List