Product Experts Available 1-800-252-7427

FORD IGNITION COILS FOR ALL YEARS AND MODELS

Filter Your Result

BRAND
  1. (25)
  2. (1)
  3. (2)
  4. (1)
PRICE RANGE
  1. (3)
  2. (19)
  3. (13)
 
Items 1 to 24 of 35 total Show per page Page:
  1. 1
  2. 2
  3. Next Page
Grid  List 
Chrome Coil Cover Kit Part # 90-74243-1
Fits over standard coil. Triple chrome plated coil cover adds flair to your engine compartment. Complete with bracket and cover. A snap to install. 2 pc chrome coil cover kit. Includes chrome coil cover and chrome coil bracket. Learn More
$21.99 Kit
Ignitor Ignition Kit-Black Coil Part # 90-78035-1
Quality Upgrade From Pertronix Includes The Popular Ignitor, Coil, And Spark Plug Wires Significant Savings Over Purchasing These Parts Individually For V-8 Single-Point Ford Ignition Systems Made From 1957-1974 We now offer a complete kit of quality American made Pertronix Ignitor ignition products. Never change your points again! Get the Ignitor solid state ignition (to replace points), high performance Flame Thrower 8mm. spark plug wire set, and high performance Flame Thrower ignition coil in one cost cutting kit. Save time and money! Learn More
$182.99 Kit
Pertronix Ignitor II Ignition Kit - Black Coil For Ford V8 Part # 90-377461-1
Quality Upgrade From Stock Components Includes Pertronix Ignitor II Ignition System, Low-Resistance Flame Thrower II Coil, And Flame Thrower Spark Plug Wires Also Includes A Quality Distributor Cap With Brass Contacts, And A Matching Rotor No Condenser Needed  Significant Savings Over Purchasing These Parts Individually For V-8 Single-Point Ford  V8 Engines  (Except 292) Made From 1957-1974 This is a great kit which is appropriate for most Ford V8 engines made between 1957-1974.  The most significant component included is the Pertronix Ignitor II point eliminator.  You can take performance one-step higher with the Ignitor II. The dwell is constantly monitored by a new microcontroller and adjustments are made to maintain peak efficiency throughout the entire RPM range.  Best of all you never have to replace points again while maintaing a stock look.  Next is a low-resistance (0.6 ohm) Pertronix Flame Thrower II coil.  The Ignitor II needs a coil with this resistance, and the Flame Thrower II produces up to 45,000 volts for a powerful, clean spark.  Since it is black, the sticker can be removed for stock looking engine compartments.  The tailored black Pertronix Flame Thrower spark plug wire set will transmit that spark through two current paths to your spark plugs (We chose not to include spark plugs in this kit because the proper spark plug to use varies widely depending on application and engine capability).  No tune-up is complete without a quality distributor cap with brass contacts for sure spark and long life.  Finally, a matching quality rotor is included.  You will enjoy years of smooth ignition operation by adding this kit to your pride and joy. Learn More
$245.99 Kit
Ignitor Ignition Kit-Chrome Coil Part # 90-78036-1
Quality Upgrade From Pertronix Includes The Popular Ignitor, Coil, And Spark Plug Wires Significant Savings Over Purchasing These Parts Individually For V-8 Single-Point Ford Ignition Systems Made From 1957-1974 We now offer a complete kit of quality American made Pertronix Ignitor ignition products. Never change your points again! Get the Ignitor solid state ignition (to replace points), high performance Flame Thrower 8mm. spark plug wire set, and high performance Flame Thrower ignition coil in one cost cutting kit. Save time and money! Learn More
$182.99 Kit
Flame Thrower Ignition Coil - 12 Volt - Black - V8 Part # 90-11282-1
More spark energy, with voltage to burn! This new 40,000 volt flame thrower coil allows higher voltage which allows larger spark plug gaps for added power, smoOther response and better fuel economy. Choose from oem black chrome plated. These are oil filled for better cooling and voltage insulation. A great companion to the ignitor ignition system and high performance spark plug wires. Learn More
$41.99 ea.
Flame Thrower Ignition Coil - 12 Volt - Chrome - V8 Part # 90-11281-1
Quality Upgraded Coil Chrome Plated Housing Oil Filled For Better Cooling 40,000 Volts 1.5 Ohms Resistance Our 40,000 volt Flame-Thrower chrome coil can benefit virtually any distributor type inductive system. Its higher voltage allows larger spark plug gaps for added power, smoother response and better fuel economy. It is also the perfect coil to go with the PerTronix Ignitor breakerless ignition.  These coils are internally resisted so installation and wiring is drastically simplified.  Oil filled coils offer great heat control for street driven vehicles. Learn More
$43.99 ea.
Ignition Coil - 12 Volt - Black Body - Mustard Top Part # 90-28492-1
New yellow top ignition coil is available. This 12 volt coil was used on all 1956 through 1972 Ford cars and pickups. This has been quality tested and performance assured. The correct original style coil for your car. Learn More
$67.99 ea.
Pertronix Ignitor - 6 Cylinder - Use With Solid D Shaped Distributor Shaft Part # 90-11294-1
Ignition Point Eliminator Retains Stock Distributor, Cap, And Appearance Requires No Permanent Alterations To Your Vehicle This system is great! The Ignitor is a breakerless solid state ignition that fits inside your standard distributor and is completely self contained. It allows your engine to start fast every time, reduces battery drains, improves fuel economy and stretches spark plug life tremendously. Best of all, it installs in 10 minutes! There is even a lifetime factory warranty. Never change your points again! Each Ignitor comes complete with instructions. It hooks directly to your coil.  You will enjoy no more replacement of points or condensors with a one time installation for life. For use with stock coil or standard Flame Thrower coil only ! Using this module with any high performance coil (stock or aftermarket) or using it with the Flame Thrower 2 coil will damage the module. Use with coils having 1.5 ohms resistance or greater. Not compatible with high energy ignition coils. This part number is primarily for 1960/1964 six cylinder Ford engines. For 1965 and later see our alternate items. Important for 6 cylinder owners: Since in many of these classics the engine might have been changed over the years, pull off the rotor and look at the top of the distributor shaft before ordering.   Learn More
$96.99 ea.
Flame Thrower II Ignition Coil -12 Volt - Chrome - V8 Part # 90-11285-1
Replacement Coil 45,000 Volts @ 0.6 Ohms For Use With Inductive Ignition Systems Learn More
$46.99 ea.
Ignition Coil Bracket - Painted Black Part # 90-36328-1
Reproduction ignition coil bracket, finished in black and or stainless. Special design works with both stock and pertronix ignition coils. Learn More
$13.49 ea.
Pertronix Ignitor - 6 Cylinder - Use With Hollow DistributorShaft Part # 90-11293-1
This system is great! The ignitor is a breakerless solid state ignition that fits inside your standard distributor and is completely self contained. Allows your car to start fast every time, reduces battery drains, improves fuel economy and stretches spark plug life tremendously. Best of all, it installs in 10 minutes! Lifetime factory warranty. Specify model when ordering. Never change your points again! Complete instructions. Direct hook up to your original coil, no more replacement of points or condensors. One time installation for life. For use with stock coil or standard flame thrower coil only ! Using this module with any hi performance coil (stock or aftermarket) or using it with the flame thrower 2 coil will damage the module. Use with coils having 1.5 ohms resistance or greater. Not applicable with high energy ignition coils. For 1965/1970 vehicles with six cylinder Ford engines. Complete with instructions. Learn More
$95.99 ea.
Ignition Coil Bracket - Stainless Steel Part # 90-36329-1
Reproduction ignition coil bracket, finished in black and or stainless. Special design works with both stock and pertronix ignition coils. Learn More

Was: $17.95 ea.

Now: $13.49 ea.

Pertronix Ignitor Hi-Performance Coil, Epoxy Filled, Black, 40,000 Volts, 1.5 Ohms Resistance Part # 90-74245-1
Quality Upgraded Coil Black Painted Housing Epoxy Filled To Withstand Harsh Conditions 40,000 Volts 1.5 Ohms Resistance Our 40,000 volt Flame-Thrower epoxy-filled canister coil can benefit virtually any distributor type inductive system. Its higher voltage allows larger spark plug gaps for added power, smoother response and better fuel economy. It is also the perfect coil to go with the PerTronix Ignitor breakerless ignition.  These coils are internally resisted so installation and wiring is drastically simplified.  Oil filled coils offer great heat control for street driven vehicles, while epoxy filled coils provide superior winding support for even high vibration environments as found in off-road vehicles and boats.  Selecting an epoxy-filled coil will prepare your vehicle for whatever environment you choose.  Learn More
$52.99 ea.
Flame Thrower 2 Coil-bk, Epoxy Part # 90-74250-1
Flame-Thrower II Coil Designed For Use With Ignitor II Ignition Systems Low 0.6 Ohm Resistance With More Than 45,000 Volts Epoxy Filled For Extra Vibration Protection Durable Black Finish Provides "Hotter" Spark For Better Combustion Allows For Wider Spark Plug Gaps Adds Power, Smoother Response & Better Fuel Economy   Upgrade from your stock coil to more powerful Flame-Thrower II coils from PerTronix. Designed for use with PerTronix's own Ignitor II ignition systems, these 0.6 ohm coils deliver more than 45,000 V to your plugs for fuller, more complete combustion. Most have oil-filled canisters to keep the low-resistance windings secure and cool for reliable long-term performance. But there also are epoxy-filled versions for when vibration protection is needed. The Flame-Thrower IIs are available in chrome or black (epoxy, black only) and are not for use with original Ignitor ignition systems. For all of your classic Ford needs, count on Dearborn Classics. Learn More

Was: $55.99 ea.

Now: $52.99 ea.

Ignitor 3 -v8 (single Pt.) Part # 90-74251-1
This new ignitor features a multiple spark thru the entire rpm range for improved combustion, increased spark energy for more horsepower & better mileage, a rev limit set by user which is accurate to +/- 50 rpm, and it replaces points or can be used as an upgrade for flame-thrower billet v8 distributors. It offers the benefits of an ignition box, but is located under the cap of your distributor, to help keep the engine bay uncluttered. Learn More
$151.99 ea.
Ford Motorcraft Distributor Ignitor Solid State Ignition System By Pertronix, For Dual Point Distributors W/O Advance Part # 90-74244-1
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ignition system. The Ignitor has been called the stealth ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no black-box to clutter the engine compartment. For optimal performance, use the Ignitor with Flame-Thrower 40,000 volt coils. Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life 2:1 improvement over points in current fall time for increased coil output Rotationg cobalt magnets trigger a Hall Effect integrated circuit no points to burn, no moving parts to wear out Epoxy molding makes this module impervious to dirt, oil, grease, and moisture Stable timing - No need for any adjustments Learn More
$98.99 ea.
Ignitor 2 Ignition, 6 Cylinder (1960/1964) Part # 90-74247-1
Millions have upgraded their point style ignitions with the ignitor electronic module, gaining horsepower, quicker starting and longer plug life. Ignitor 2 takes it a step further by adding a powerful new micro controller that controls the dwell period, for the best possible spark over the entire rpm range. Igntitor 2 offers enhanced performance levels only found in more expensive box type ignition systems. Ignitor 2 also shares the same features that make the current ignitor so popular: it fits entirely inside the distributor for the stock look, installs easily, and you ll never change or adjust your points again. Learn More
$132.99 ea.
Ignitor 2 Ignition-6 Cylinder (1965/1970) Part # 90-74248-1
Millions have upgraded their point style ignitions with the ignitor electronic module, gaining horsepower, quicker starting and longer plug life. Ignitor 2 takes it a step further by adding a powerful new micro controller that controls the dwell period, for the best possible spark over the entire rpm range. Igntitor 2 offers enhanced performance levels only found in more expensive box type ignition systems. Ignitor 2 also shares the same features that make the current ignitor so popular: it fits entirely inside the distributor for the stock look, installs easily, and you ll never change or adjust your points again. Learn More
$130.99 ea.
Ignition Coil Bracket, 6 Cylinder, Fairlane & Torino 1962-1971 Part # 90-68355-1
Quality Restoration Part Duplicate Of Original Special 6-Cylinder Design Collectors are really beginning to appreciate the economy and durability of older vehicles equipped with 6-cylinder engines.  For that reason a demand has arisen for correct parts for these vehicles.  Coil brackets often have been lost or damaged over the years so we at Dearborn Classics are proud to be able to offer this very nice reproduction of the original.  Since it is so visible it is great to find a bracket of this quality. Learn More
$52.35 ea.
Items 1 to 24 of 35 total Show per page Page:
  1. 1
  2. 2
  3. Next Page
Grid  List