Product Experts Available 1-800-252-7427

FORD STARTERS FOR ALL YEARS AND MODELS

Your engine, complete with Classic Ford starter, is the beating heart of your car. Without it, no other system works or has meaning. That's why it's essential to keep your engine primed with great, high-quality parts. Dearborn Classics has everything you need when it comes to Classic Ford starters and engine starter parts. We're the most trusted name in Classic Fords, because we love the cars as much as you do. That's the reason we have the best selection of starters and the lowest prices on Classic Ford engine starter parts. Don't let your engine idle; get it going with a new Classic Ford starter today.

Filter Your Result

CATEGORY
  1. Glow Plug (4)
  2. Starter Hardware (5)
  3. Starters and Solenoids (44)
BRAND
  1. (4)
  2. (2)
  3. (4)
  4. (1)
  5. (32)
  6. (3)
PRICE RANGE
  1. (7)
  2. (1)
  3. (11)
  4. (4)
  5. (29)
 
Items 1 to 24 of 52 total Show per page Page:
  1. 1
  2. 2
  3. 3
  4. Next Page
Grid  List 
Starter Relay - Replacement Style - 12 Volt Part # 90-28487-1
12-Volt, replacement style, with "FoMoCo" script & 2701966 in block letters on the top of the bracket.   Learn More
$14.99 ea.
Ground Strap - Reproduction Part # 90-50359-1
We have a correct engine ground wire that fits 1960/1964 Galaxie. This engine ground wire is manufactured with the correct style hypolon insulation ( the same style as the spark plug wires before they used silicone). Learn More
$6.49 ea.
Starter Relay - Exact Reproduction - Fine Threaded Lugs Part # 90-28489-1
We have an exact reproduction of the original Ford starter solenoids used in 60/79 Ford vehicles. These starter solenoids are true to original Ford. Original stamped markings. Brown cases were used up until january 1965 with fomoco script writing. After this date, Ford changed to a black case and block style fomoco letters. There was a period of several months where both styles were available. This solenoid is the black case with script style letters. (the brown case is no longer available) Learn More
$46.99 ea.
Starter Relay - Coarse Thread Studs - Vented Bottom - Stamped C7AF-11450-A1 and Autolite Part # 90-40314-1
These starter relays are exact reproductions of the originals. They all feature a finely detailed case, correct lugs, and correctly styled hardware. Original markings are stamped into the metal bracket on top.     Learn More
$42.99 ea.
Starter Relay - Exact Reproduction - Fine Threaded Lugs Part # 90-28488-1
We have an exact reproduction of the original Ford starter solenoids used in 60/79 Ford vehicles. These starter solenoids are true to original Ford. Original stamped markings. Brown cases were used up until january 1965 with fomoco script writing. After this date, Ford changed to a black case and block style fomoco letters. There was a period of several months where both styles were available. This solenoid is the black case with block style letters. Learn More
$46.99 ea.
Starter Relay Part # 90-68524-1
Brown Bakelite Body Fine Thread Lugs as Original Stamped 2701966 and FoMoCo in Block Letters Learn More
$46.99 ea.
Heat Shield, Starter Part # 90-253987-1
In today's high-heat environment, starters take in a lot of damaging heat that destroys the windings of the starter and solenoid. To combat this problem, Thermo-Tec created a non-conductive strap-on heat shield with a highly-reflective mylar surface. The Starter Heat Shield will reflect over 90% of radiant heat, adding life to the starter and assuring reliable starts. The Starter Heat Shield is a universal kit that fits all starters and does include  two 24" Snap-Straps for ease of installation. Learn More
$34.99 ea.
Powermaster Ultra-High Torque Starter, 332-428 FE Part # 90-74286-1
Ultra-High Torque Starter Fits  332-428 FE  V8 Engines 200 ft/lbs OF Torque Cranks  Up To 18:1 Compression 4.4:1 Gear Reduction Machined Aluminum infi-CLOCK Mounting Block Clears Most Oil Pans & Headers Weighs Only 8.5 lbs Starter Dyno Results Included   Try a Powermaster and you'll wonder how you ever lived with your stock starter! Powermaster Mastertorque Series starters are the ultimate in performance starters. These can be used as an excellent improvement over original starters. Available in high torque and ultra high torque, these have the power to spin over your high compression motors and are not affected by heat soak. This starter features 200 ft/lbs of torque and is sufficient for street and high performance motors up to 18:1 compression. It features a 4.4:1 gear reduction and a machined aluminum adapter block. It is an ideal choice where space limitations are a concern. The unit weighs in at only 8.5 lbs and will clear most oil pans and headers. It fits 332-428 FE engines with automatic transmission and 5-speed manual. For all of your classic Ford needs, count on Dearborn Classics. Learn More

Was: $429.95 ea.

Now: $338.99 ea.

Powermaster Ultra High Torque Starter, 289-351W With Automatic Or 5-Speed Part # 90-74283-1
Ultra-High Torque Starter Fits 289/302/351W V8 Works With Automatic Or 5-Speed Manual Trans 200 ft/lbs OF Torque Cranks  Up To 18:1 Compression 4.4:1 Gear Reduction Machined Aluminum infi-CLOCK Mounting Block Clears Most Oil Pans & Headers Weighs Only 8.5 lbs Starter Dyno Results Included   Try a Powermaster and you'll wonder how you ever lived with your stock starter! Powermaster Mastertorque Series starters are the ultimate in performance starters. These can be used as an excellent improvement over original starters. Available in high torque and ultra high torque, these have the power to spin over your high compression motors and are not affected by heat soak. This starter features 200 ft/lbs of torque and is sufficient for street and high performance motors up to 18:1 compression. It features a 4.4:1 gear reduction and a machined aluminum adapter block. It is an ideal choice where space limitations are a concern. The unit weighs in at only 8.5 lbs and will clear most oil pans and headers. It fits small block Ford 289/302/351W with automatic transmission and 5-speed manual. For all of your classic Ford needs, count on Dearborn Classics. Learn More

Was: $327.95 ea.

Now: $300.95 ea.

Ultra High Torque Starter Part # 90-74285-1
Powermaster mastertorque series are the ultimate in performance starters. These can be used as an excellent improvement over original starters. Available in high torque and ultra high torque, these have the power to spin over your high compression motors and are not effected by heat soak and feature a compact desgn for header clearance. Try these and you'll wonder how you ever lived with your stock starter. This starter features 200 ft/lbs of torque and is sufficient for street and high performance motors up to 18:1 compression. It features a 4.4:1 gear reduction, a machined aluminum adapter block, adjustable mounting block and is not effected by heat soak and is an ideal choice where space limitations are a concern. The unit weighs in at 8.5 lbs and will clear most oil pans and headers. It fits the v-8 Ford 351m/400/429/460 Learn More

Was: $349.95 ea.

Now: $308.99 ea.

High-Torque - 200 Ft. Lb. - Starter, XS Torque, 66-70 Ford V8 Engines Part # 90-72508-1
4.4:1 Gear Reduction Ratio Ideal for engines with 18:1 Compression Ratio No heat soak problems Machined aluminum adapter block is very strong yet lightweight Minimally intrusive in the engine bay The lightest 200 ft. lb. starter! Important Information about this Starter: If you're using an aftermarket bellhousing and/or adapter, always refer to the manufacturer's specifications and recommended starter. Please also be aware that upgrading your starter means that you must make sure your classic Ford's electrical system can handle the increased voltage requirements. PowerMaster recommends the minimum voltage required for this starter is 9.5 Volts, and some starter upgrades can demand up to 500 Amperes from the system. Please be sure to read the directions carefully when installing. NOTE: Please do not enlarge any holes or grind anything to make this unit fit. If your classic Ford V8 engine is highly-modified, if heat soak is a concern of yours, or if your under-the-hood space is limited, then check out some solutions available to you from the best selection and lowest prices around: The XS Torque, by PowerMaster, is a 200 Foot-Pound Starter that will get your highly-modified or heavy-duty engine block cranking in no time. This starter is optimal with 18:1 compression engines, so it's not your everyday starter; this starter is for classic Ford engines that mean BUSINESS! As an added bonus, you can even dial-in the starter drive using the unique InfiCLOCK system, which allows you to mount the starter where YOU need it and have the starter drive positioned perfectly, without having to find a "best-fit" setting and work your exhaust headers around the starter. When it comes to upgrading and maintaining your classic Ford V8 engine, the most-trusted name is MAC's Antique Auto Parts, where you can find everything you need for the lowest-price guaranteed! Learn More
$285.99 ea.

Was: $59.95 ea.

Now: $49.99 ea.

High-Torque - 200 Ft. Lb. - Starter, XS Torque, 63-79 Ford V8 Engines with 5-Speed Manual Transmission Part # 90-72302-1
4.4:1 Gear Reduction Ratio Ideal for engines with 18:1 Compression Ratio Machined aluminum adapter block - strong yet lightweight! Minimally intrusive on the rest of the engine bay If your classic Ford V8 engine is highly-modified, if heat soak is a concern of yours, or if your under-the-hood space is limited, then check out some solutions available to you from the best selection and lowest prices around: The XS Torque, by PowerMaster, is a 200 Foot-Pound Starter that will get your highly-modified or heavy-duty engine block cranking in no time. This starter is optimal with 18:1 compression engines, so it's not your everyday starter; this starter is for classic Ford engines that mean BUSINESS! As an added bonus, you can even dial-in the starter drive using the unique InfiCLOCK system, which allows you to mount the starter where YOU need it and have the starter drive positioned perfectly, without having to find a "best-fit" setting and work your exhaust headers around the starter. When it comes to upgrading and maintaining your classic Ford V8 engine, the most-trusted name is MAC's Antique Auto Parts, where you can find everything you need for the lowest-price guaranteed! Learn More
$309.99 ea.
Upgraded Torque - 160 Ft. Lb. - Starter, PowerMAX Gear Reduction Upgrade, Chrome, 68-79 Ford V8 Engines Part # 90-72363-1
4.4:1 Gear Reduction Ratio Ideal for engines with 10:1 Compression Ratio Permanent Magnet for efficiency and durability If you have a mostly-stock engine in your classic Ford, then this Upgraded Torque Starter will suit your needs nicely. From the best selection of engine parts and upgrades at MAC's Antique Auto Parts comes the PowerMAX Gear Reduction Starter, by PowerMaster. This starter cranks out 160 Foot-Pounds of torque for Ford V8 engines with stock compression and timing, which will get your block roaring to life in no-time at all! MAC's Antique Auto Parts has all the starter system equipment you need to restore or modify your classic Ford, and all at the lowest-price guaranteed! Learn More
$300.95 ea.
Upgraded Torque - 160 Ft. Lb. - Starter, PowerMAX Gear Reduction Upgrade, 68-79 Ford V8 Engines Part # 90-72391-1
4.4:1 Gear Reduction Ratio Ideal for engines with 10:1 Compression Ratio Permanent Magnet for efficiency and durability If you have a mostly-stock engine in your classic Ford, then this Upgraded Torque Starter will suit your needs nicely. From the best selection of engine parts and upgrades at MAC's Antique Auto Parts comes the PowerMAX Gear Reduction Starter, by PowerMaster. This starter cranks out 160 Foot-Pounds of torque for Ford V8 engines with stock compression and timing, which will get your block roaring to life in no-time at all! MAC's Antique Auto Parts has all the starter system equipment you need to restore or modify your classic Ford, and all at the lowest-price guaranteed! Learn More
$180.95 ea.
High-Torque - 200 Ft. Lb. - Starter, XS Torque, Chrome, 63-79 Ford V8 Engines with 5-Speed Manual Transmission Part # 90-72397-1
4.4:1 Gear Reduction Ratio No heat soak problems Machined aluminum adapter block is very strong yet lightweight Minimally intrusive in the engine bay The lightest 200 ft. lb. starter! If your classic Ford V8 engine is highly-modified, if heat soak is a concern of yours, or if your under-the-hood space is limited, then check out some solutions available to you from the best selection and lowest prices around: The XS Torque, by PowerMaster, is a 200 Foot-Pound Starter that will get your highly-modified or heavy-duty engine block cranking in no time. This starter is optimal with 18:1 compression engines, so it's not your everyday starter; this starter is for classic Ford engines that mean BUSINESS! As an added bonus, you can even dial-in the starter drive using the unique InfiCLOCK system, which allows you to mount the starter where YOU need it and have the starter drive positioned perfectly, without having to find a "best-fit" setting and work your exhaust headers around the starter. When it comes to upgrading and maintaining your classic Ford V8 engine, the most-trusted name is MAC's Antique Auto Parts, where you can find everything you need for the lowest-price guaranteed! Learn More
$400.95 ea.
Items 1 to 24 of 52 total Show per page Page:
  1. 1
  2. 2
  3. 3
  4. Next Page
Grid  List