Product Experts Available 1-800-252-7427

FORD BODY PARTS FOR ALL YEARS AND MODELS

To the outside observer, the most important thing about a Classic Ford is the body. That's why Dearborn Classics , the most trusted name in Classic Fords, has such a large selection of Classic Ford replacement body part. Do you need a new Classic Ford door? We've got you covered. How about a new Classic Ford fender? We've got those too. If your Classic Ford hood isn't what it used to be, come to Dearborn Classics for high-quality, low cost replacements sure to make you and your Ford look great out on the open road. Dearborn Classics is your one-stop shop for Classic Ford fiber glass and sheet metal.

Filter Your Result

CATEGORY
  1. Door (15)
  2. Fender (27)
  3. Floor Pans (110)
  4. Front Body Panels (19)
  5. Front Bumper (28)
  6. Hoods (50)
  7. Inner Skirts (6)
  8. Misc. Fiberglass Parts (16)
  9. Misc. Sheet Metal (39)
  10. Quarter Panels (76)
  11. Rear Body Panels (5)
  12. Rear Bumper (18)
  13. Rear Wheelhouse (5)
  14. Rocker Panels (47)
  15. Truck Bed Panel and Floor (5)
  16. Trunk and Cargo (9)
  17. Windshield (1)
BRAND
  1. (2)
  2. (304)
  3. (13)
  4. (8)
PRICE RANGE
  1. (20)
  2. (57)
  3. (240)
  4. (235)
  5. (172)
 
Items 1 to 24 of 724 total Show per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next Page
Grid  List 
64/65 FALCON/RANCHERO BUMPER KIT (F&R) Part # 90-83797-1
High-Quality Reproduction Of Original Includes Front & Rear Bumpers Great Value Get a great look for your ride at a bargain price! These 1964-1965 Ford Falcon/Ranchero bumper kits for your Dearborn, brought to you by Dearborn Classics, will help you bring back the beauty of your restored vehicle. No Dearborn is complete without a nice set of bumpers, and these 1964 & 1965 Falcon/Ranchero style bumpers can give your restored vehicle the edge it needs. And as always, remember to trust Dearborn Classics for all your restoration needs. This Ships Out At Oversized 3 At A Total Of 50 Pounds Learn More
$831.99 Kit
Trunk Pan Set - Center Part Of The Floor Part # 90-37097-1
Full Trunk Floor Pan OE Style Ribs And Curves Patterened From An Original Hardtop Floor Can Be Used For Convertibles This replacement Trunk Floor Pan is made specifically to repair the original on a Ford Galaxie, and other Full-Size Fords for the years 1965, 1966, 1967, and 1968. There is enough material to replace the whole floor on hardtop models, but you may need to reuse some of the original floor on convertibles.  Luckily the area that will need to be reused is usually good even on very rusty cars.  You can count on Dearborn Classics for what you need for your big Ford!  Please check fit before altering this floor pan.  Painted or otherwise modified sheet metal is not returnable regardless of the reason. Learn More
$311.99 Set
Hood Pad Set - 4 Pieces Part # 90-35756-1
Our standard hood insulation kit can be used on all models. The kit comes with one large piece of original style insulation and original hood insulation clips. This is a standard size that must be patterned by you and cut to your specific application. For 63/67 models we have an exact die cut reproduction for Fairlane. We now have the correct black nylon clups used with original hood insulations for 60/79 models. Clips not included. Order part #hic100 or #hic101 per appoication. Learn More

Was: $79.99 Set

Now: $48.99 Set

POR-15® Floor Pan & Trunk Restoration Kit Part # 90-76420-1
No welding Easy To Use Complete Kit You'll save hundreds of dollars over replacement... and your restoration will be better than replacement because you'll never see rust again. Whether it's a daily driver or a show car, you will maintain the integrity of the structure with no ugly welded seams. Repairs floor pans, trunk pans, pickup truck beds, etc. Kit includes metal cleaner, metal ready, power mesh fabric, por-15 (black) , por epoxy putty, chassis coat black, por solvent, brushes, safety mask, latex gloves, dispensing scoop and easy step by step instructions. This must be shipped via ground service. Learn More
$162.99 Kit
POR-15® Floor Pan & Trunk Restoration Kit Part # 90-71708-1
No welding Easy To Use Complete Kit You'll save hundreds of dollars over replacement... and your restoration will be better than replacement because you'll never see rust again. Whether it's a daily driver or a show car, you will maintain the integrity of the structure with no ugly welded seams. Repairs floor pans, trunk pans, pickup truck beds, etc. Kit includes metal cleaner, metal ready, power mesh fabric, por-15 (black) , por epoxy putty, chassis coat black, por solvent, brushes, safety mask, latex gloves, dispensing scoop and easy step by step instructions. This must be shipped via ground service. Learn More
$162.99 Kit
Fender To Apron Anti-Squeak Seal Kit - 75" Long - Ford Part # 90-33455-1
Enought To Do Both Sides Cut To Fit Includes Staples To Attach     This seal comes in one 75” long piece.  This is enough for both sides but must be cut to fit.  The kit includes staples to attach seal to apron. Learn More
$10.99 Kit
1963 Galaxie Under Rear Set Floor Panel Part # 90-454054-1
New Exclusive ReproductionOriginal Quality ConstructionDirect Replacement For O.E.M.Ford Licensed Product Now available is this duplicate of the original from Auto Metal Direct. You will find the quality of this piece justifies the cost, and provides a superior finished productl. It is truly a premium grade restoration product. Like any replacement parts, make sure you fit carefully to the car before final assembly. This step will produce the results your restoration deserves. Learn More
$369.99 ea.
1964 Galaxie Front Bumper Bracket Set Part # 90-454092-1
Stamped Steel ConstructionExcellent Fit & FinishDirect Replacement For O.E.M.Get The Set And SaveFord Licensed Product Often bent, rusted or missing, these brackets are necessary to support the bumper. They are reproduced to original specifications and are EDP coated for protection. Like other Auto Metal Direct products, these brackets are a premium grade restoration product. Learn More
$259.99 ea.
1964 Galaxie Rear Bumper Bracket Set Part # 90-454410-1
Stamped Steel ConstructionExcellent Fit & FinishDirect Replacement For O.E.M.Get This 5-Piece Set And SaveFord Licensed Product Often bent, rusted or missing, these brackets are necessary to support the bumper. They are reproduced to original specifications and are EDP coated for protection. Like other Auto Metal Direct products, these brackets are a premium grade restoration product. Learn More
$289.99 Set
1970-1977 Ford Maverick standard 1/8 in windshield kit - Heidts AL-801228 Part # 90-848802-1
70-77 Maverick windshield Heidts Automotive Group provides the best suspension and related chassis component solutions to create a superior buyer experience for the professional and hobbyist car builder or installer. The best suspension products are derived from field-tested component creation intelligently engineered parts and absolutely the best quality American-made manufacturing possible. All of HEIDTS crossmembers and brackets are cut with our high definition plasma cutter. This in-house production allows instant inventory fulfillment when demand increases. This is also how HEIDTS is able to be the fastest shipper in the industry. HEIDTS does its own polishing in-house and produces some of the nicest polished parts in the industry. HEIDTS bends all of their crossmembers brackets and other components in-house. The lathe area has two CNC lathes and a trusty turret lathe. These machines are kept running to capacity constantly. HEIDTS operates 12 MIG and TIG stations. Learn More
$175.99 ea.
1960-1963 Galaxie, 1961-1963 Monterey, 1963 Marauder Floor Brace 11 Piece Set Part # 90-849351-1
New Exclusive Reproductions Original Quality Construction Buy The Set And Save Direct Replacement For O.E.M. Ford Licensed Product   Now available is this reproduction 11 piece floor brace set for the 1960-63 Ford Galaxie, 61-63 Mercury Monterey & 1963 Marauder from Auto Metal Direct. This set includes all our individually available braces in one easy to order kit. Stamped from high quality OE gauge steel on our exclusive new tools. Each floor brace features correct as original bends, welds, seams and holes. Like all AMD parts, this item arrives EDP coated to help protect against rust and corrosion.  You will find the quality of this piece justifies the cost, and provides a superior finished product. It is truly a premium grade restoration set of braces. Like any replacement parts, make sure you fit carefully to the car before final assembly. This step will produce the results your restoration deserves. Learn More
$479.99 Set
Ranchero Bed Floor Screw Set, 40 Pieces, 1957-1965 Part # 90-76828-1
These screws are sold in sets of 40. This should be more than enough to make your Rancheros bed look great! Learn More
$22.99 Set
Falcon and Ranchero Hood Cover and Insulation Kit, AcoustiHOOD, 1960-1963 Part # 90-88259-1
Officially Licensed by Ford These Kits Are Created To Exactly Match Your Order Designed To Work With Factory Stock Hoods The High Temp ABS Material Will Regularly Tolerate Temperatures Up To 250 Degrees Requires At Least One Inch Clearance Between Cover And Engine Components Example Hood Cover Shown Under Hood Cover Kits are QuietRIDE's newest product for insulating your engine compartment and dressing up the under side of the hood of your Falcon or Falcon Ranchero. Smooth Under Hood Covers and 3-D molded Under Hood Covers with various logos in raised letters and graphics are available. Every hood cover kit is pre-cut and ready to install and are Officially Licensed Products. Each 1960-1963 Ford Falcon and Ranchero Under Hood Cover AcoustiHood Kit includes: Heatshield Panels, Mounting Pins, Spray Adhesive, Seam Tape, and Installation Instructions as necessary. Learn More

Was: $241.99 Kit

Now: $227.99 Kit

Falcon And Ranchero Left Front Bumper Bracket Set, 1964-1965 Part # 90-93997-1
Quality Restoration Part Faithful Reproduction Of The Original To Replace Damaged, Ugly, Or Missing Originals Bumpers And Related Hardware Also Available For Driver's Side   Time and the elements are tough on bumper brackets. Moisture and road salt make them rusty, and they are often bent. More than one restorer has damaged a new or newly rechromed bumper by trying to reuse old brackets. This inner and outer set were reproduced using 'survivor' originals and will fit like new. Bumpers and other hardware including stainless steel bumper bolts are available right here at MAC's! Learn More
$120.99 Set
Torino and Ranchero Hood Cover and Insulation Kit, AcoustiHOOD, 1970-1971 Part # 90-89114-1
Officially Licensed by Ford These Kits Are Created To Exactly Match Your Order Designed To Work With Factory Stock Hoods The High Temp ABS Material Will Regularly Tolerate Temperatures Up To 250 Degrees. Requires At Least One Inch Clearance Between Cover And Engine Components Example Hood Cover Shown Under Hood Cover Kits are QuietRIDE's newest product for insulating your engine compartment and dressing up the under side of the hood of your Torino or Ranchero. Smooth Under Hood Covers and 3-D molded Under Hood Covers with various logos in raised letters and graphics are available. Every hood cover kit is pre-cut and ready to install and are Officially Licensed Products. Each 1970-1971 Ford Torino and Ranchero Under Hood Cover AcoustiHood Kit includes: Heatshield Panels, Mounting Pins, Spray Adhesive, Seam Tape, and Installation Instructions as necessary. Learn More

Was: $241.99 Kit

Now: $227.99 Kit

Tilt Hood Kit, Standard, Universal Part # 90-76692-1
High Strength Black Finish Industrial Steel Construction Adjustable Hood Hinge Detailed Instructions Limited Lifetime Warranty Professional Installation Recommended Tilt your hood the right way! This Tilt Hood Kit gives you the same custom look of many of world's top performance vehicles. This kit makes it easy to reverse the tilt on your hood! Not only does it give you a custom look, it also allows for easy access and maximum visibility, so everyone can see what your rocking under the hood! Learn More
$263.99 Kit
Tilt Hood Kit, Automatic, Universal Part # 90-76693-1
High Strength Black Finish Industrial Steel Construction Adjustable Hood Hinge Detailed Instructions Limited Lifetime Warranty Professional Installation Recommended Power Automatic Without Remote Option   Tilt your hood the right way! AutoLöc's Tilt Hood Kit gives you the same custom look of many of world's top performance vehicles. AutoLöc's kit makes it easy to reverse the tilt on your hood! Not only does it give you a custom look, it also allows for easy access and maximum visibility, so everyone can see what your rocking under the hood! Learn More
$999.99 Kit
Falcon And Ranchero Right Front Bumper Bracket Set, 1964-1965 Part # 90-93998-1
Quality Restoration Part Faithful Reproduction Of The Original To Replace Damaged, Ugly, Or Missing Originals Bumpers And Related Hardware Also Available For Passenger's Side Time and the elements are tough on bumper brackets. Moisture and road salt make them rusty, and they are often bent. More than one restorer has damaged a new or newly rechromed bumper by trying to reuse old brackets. This inner and outer set were reproduced using 'survivor' originals and will fit like new. Bumpers and other hardware including stainless steel bumper bolts are available right here at MAC's! Learn More
$120.99 Set
Fairlane and 1967 Ranchero Hood Cover and Insulation Kit, AcoustiHOOD, 1966-1967 Part # 90-88342-1
Officially Licensed by Ford These Kits Are Created To Exactly Match Your Order Designed To Work With Factory Stock Hoods The High Temp ABS Material Will Regularly Tolerate Temperatures Up To 250 Degrees. Requires At Least One Inch Clearance Between Cover And Engine Components Example Hood Cover Shown Under Hood Cover Kits are QuietRIDE's newest product for insulating your engine compartment and dressing up the under side of the hood of your Fairlane or Fairlane Ranchero. Smooth Under Hood Covers and 3-D molded Under Hood Covers with various logos in raised letters and graphics are available. Every hood cover kit is pre-cut and ready to install and are Officially Licensed Products. Each 1966-1967 Ford Fairlane/1967 Ranchero Under Hood Cover AcoustiHood Kit includes: Heatshield Panels, Mounting Pins, Spray Adhesive, Seam Tape, and Installation Instructions as necessary. Learn More

Was: $241.99 Kit

Now: $227.99 Kit

Fairlane and Ranchero Hood Cover and Insulation Kit, AcoustiHOOD, 1968-1969 Part # 90-88356-1
Officially Licensed by Ford These Kits Are Created To Exactly Match Your Order Designed To Work With Factory Stock Hoods The High Temp ABS Material Will Regularly Tolerate Temperatures Up To 250 Degrees. Requires At Least One Inch Clearance Between Cover And Engine Components Example Hood Cover Shown Under Hood Cover Kits are QuietRIDE's newest product for insulating your engine compartment and dressing up the under side of the hood of your Fairlane or Ranchero. Smooth Under Hood Covers and 3-D molded Under Hood Covers with various logos in raised letters and graphics are available. Every hood cover kit is pre-cut and ready to install and are Officially Licensed Products. Each 1968-1969 Ford Fairlane and Ranchero Under Hood Cover AcoustiHood Kit includes: Heatshield Panels, Mounting Pins, Spray Adhesive, Seam Tape, and Installation Instructions as necessary. Learn More

Was: $241.99 Kit

Now: $227.99 Kit

Falcon and 1966 Ranchero Hood Cover and Insulation Kit, AcoustiHOOD, 1966-1970 Part # 90-88368-1
Officially Licensed by Ford These Kits Are Created To Exactly Match Your Order Designed To Work With Factory Stock Hoods The High Temp ABS Material Will Regularly Tolerate Temperatures Up To 250 Degrees. Requires At Least One Inch Clearance Between Cover And Engine Components Example Hood Cover Shown Under Hood Cover Kits are QuietRIDE's newest product for insulating your engine compartment and dressing up the under side of the hood of your Falcon or Falcon Ranchero. Smooth Under Hood Covers and 3-D molded Under Hood Covers with various logos in raised letters and graphics are available. Every hood cover kit is pre-cut and ready to install and are Officially Licensed Products. Each 1966-1970 Ford Falcon and 1966 Ranchero Under Hood Cover AcoustiHood Kit includes: Heatshield Panels, Mounting Pins, Spray Adhesive, Seam Tape, and Installation Instructions as necessary. Learn More

Was: $240.99 Kit

Now: $227.99 Kit

Items 1 to 24 of 724 total Show per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next Page
Grid  List