Product Experts Available 1-800-252-7427

FORD REAR BODY HARDWARE FOR ALL YEARS AND MODELS

Your Classic Ford rear body needs to be an extension of you, and that's why it's important to put your personality and style into it. You can start by picking up the latest and greatest in Classic Ford rear body hardware. Not just the trimmings, either. You need important pieces like the Classic Ford rear bumper brace to add to your car. Dearborn Classics is the most trusted name in Classic Fords because we love them as much as you do. That's why we have such an unbeatable selection of Classic Ford rear body hardware and top-flight rear body parts.

Filter Your Result

CATEGORY
  1. Bumper Hardware (8)
  2. Gas Door Hardware (7)
  3. Rear Body Hardware (9)
BRAND
  1. (4)
PRICE RANGE
  1. (6)
  2. (4)
  3. (5)
  4. (7)
  5. (1)
 
23 Item(s) Show per page Grid  List 
Ranchero Bed Floor Screw Set, 40 Pieces, 1957-1965 Part # 90-76828-1
These screws are sold in sets of 40. This should be more than enough to make your Rancheros bed look great! Learn More
$20.79 Set
Bumper Bolt - Stainless Steel Cap - 7/16"-14 x 1-1/4" Part # 90-35041-1
Original style chrome plated bumper bolts are available for your classic Ford. Please verify size of bolts required prior to purchase. Learn More
$3.49 ea.
Glove Box Lid or Gas Tank Filler Door Bumpers Part # 90-15427-1
New gas tank door bumpers keep your gas cap door from making noise and damage.60 gas tank door bumper Learn More
$2.49 PR
Gas Tank Filler Door Bumpers - Rubber Part # 90-14445-1
Reproduction gas tank door bumpers for 66/69 Fairlane. 61 Galaxie Learn More
$4.99 PR
Gas Tank Filler Door Bumpers Part # 90-14427-1
Eckler&rsquo s Select Series New gas tank door bumpers keep your gas cap door from making noise and damage. Learn More
$4.99 PR
Fender Bolt, Black Phosphate Coated, Fine Thread, 5/16-24x7/8", 'SEMS' Symbol On Head Part # 90-74558-1
Reproduction Black Oxide Indented Hex Head Bolts With SEMS Stamping On Head Special Captured Washer 12 Bolts Per Set Nice reproduction of a bolt which is usually rusted beyond re-use. Why buy a nice, new set of fenders and then use your nasty old bolts to put them on the car? Save time and money with this new set of fender bolts from Dearborn Classics. Learn More
$13.49 Set
Rear Bumper Step Pad, Ranchero, Torino, 1973-1979 Part # 90-74556-1
Eckler's Select Series This is the "L" Shaped rubber step pad that mounts to your rear bumper guards on the 1973/1979 Ranchero. Can be used on 1972 vehicles using bumper with guards.   Learn More
$35.99 ea.
Ford Galaxie Bumper Brackets, Fiberglass, Rear, 1963-1964 Part # 90-81959-1
These bumper bracket are designed to be used with fiberglass bumper.  These brackets are manufactured of fiberglass themselves, hardware is not included or available separately.   Learn More

: $215.99 Set

Sale Price: $190.88 Set

Rear Bumper Brackets, For Fiberglass Bumper, Fairlane, 1964 Part # 90-81978-1
Bumper brackets designed to be used with fiberglass bumpers. These brackets are manufactured of fiberglass themselves, hardware is not included or available separately.64 Fairlane rear bumper Learn More

: $103.99 ea.

Sale Price: $91.88 ea.

1963 Galaxie 500 XL Hardtop Roof Pillar Emblems Part # 90-370047-1
Quality Restoration Part Made In USA Mounting Studs Are included Made In Diecast Metal Hand Painted Fits All 1963 500 XL Hardtops (Except Fastback Code 63C) Sold  As  A  Pair   No more searching the internet for expensive NOS emblems, or dealing with worn out used originals. Dearborn Classics is proud to offer these quality USA made 1963 Galaxie 500 XL Hardtop Roof Pillar Emblems. These are reproduced in a cast metal for more durability and hand painted here in the USA! You can count on Dearborn Classics for all your quality Ford restoration parts.  Learn More

: $149.99 PR

Sale Price: $98.46 PR

Galaxie 500 XL Hardtop Package Tray Emblem, 1963 Part # 90-368067-1
Quality Restoration Part Reproduction Of Original  Made In USA Mounting Studs are included Chrome Diecast Fits All Hardtops Including 4-Doors     No more searching the internet or buying a worn out used original. MAC's is proud to offer this quality USA made Galaxie 500 XL rear package tray emblem for the Hardtop models. You can count on Dearborn Classics for all your quality Ford restoration parts. Learn More
$49.99 ea.
1963 Galaxie Fastback Roof Side To Quarter Panel Moldings Part # 90-394699-1
Quality Restoration Part Die-Cast Metal Beautiful Show-Chrome Plated Fits All 1963 Galaxie 500 Fastback With Body Code 63 Sold  As A  Pair   Now available are these extremely nice moldings that separate the rear corner of the roof from the quarter panel on '63 Galaxie fastbacks.  The same molding was used on single and two-tone cars, and those with vinyl tops.  The originals didn't hold up well, and properly restoring them can be an expensive process.  Ours are quality die-cast metal with a chrome plating job that will be right at home on daily drivers, or show-cars of the highest caliber. Like all reproduction chrome plated parts, keep a good coat of wax or polish on these to help keep them looking new, especially if you are fortunate enough to use your Galaxie a lot.  You can count on Dearborn Classics for what you need for your Galaxie, and other fine Ford products. Learn More
$164.99 PR
1964-1965 Falcon & Comet Heavy Duty 5-leaf Spring - Standard Eye Part # 90-853438-1
Fits 1964 To 1965 Ford  Falcon & Mercury Comet Not For Wagons Or Rancheros        Will Increase Ride Height By Approximately 1" Front Eye Bushings Installed Upgrade the handling and performance of your vehicle with these heavy duty 5-leaf rear springs. This standard-eye spring will lift up the rear of your car about 1" above stock ride height. This is the ideal spring for customers with oversized tires and looking for a slightly raised look. Because most leaf springs being replaced have sagged considerably you should expect at the very least a 1” lift.  Many cars are raised more when replacing extremely worn out originals on lighter weight early cars.  We also offer a mid-eye version which makes your car sit 1” lower than these springs, which will be much closer to original ride height. Both options offer superior road handling over stock 4-Leaf designs. They also help prevent wheel hop and spring wrap up on hard acceleration. Another nice feature is they are painted steel-gray to resemble OEM appearance, and to provide a nice contrast compared to traditional black replacements. PLEASE NOTE: New springs take some time to settle after being placed into service.  If you install these do not be discouraged if your ride height isn't perfect at first.  It can take up to one month of driving and being under load to balance out. Learn More
$124.99 ea.
1964-1965 Falcon & Comet Heavy Duty 5-leaf Springs, Pair - Standard Eye Part # 90-853449-1
Fits 1964 To 1965 Ford  Falcon & Mercury Mercury Comet Not For Wagons Or Rancheros        Will Increase Ride Height By Approximately 1" Front Eye Bushings Installed Buy The Pair And Save Upgrade the handling and performance of your vehicle with these heavy duty 5-leaf rear springs. These standard-eye springs will lift up the rear of your car about 1" above stock ride height. This is the ideal spring set for customers with oversized tires and looking for a slightly raised look. Because most leaf springs being replaced have sagged considerably you should expect at the very least a 1” lift.  Many cars are raised more when replacing extremely worn out originals on lighter weight early cars.  We also offer a mid-eye version which makes your car sit 1” lower than these springs, which will be much closer to original ride height. Both options offer superior road handling over stock 4-Leaf designs. They also help prevent wheel hop and spring wrap up on hard acceleration. Another nice feature is they are painted steel-gray to resemble OEM appearance, and to provide a nice contrast compared to traditional black replacements. PLEASE NOTE: New springs take some time to settle after being placed into service.  If you install these do not be discouraged if your ride height isn't perfect at first.  It can take up to one month of driving and being under load to balance out. Learn More
$229.99 PR
1964-1965 Falcon & Comet Heavy Duty 5-leaf Spring - Mid-Eye Part # 90-853453-1
Fits 1964 To 1965 Ford  Falcon & Mercury Comet Not For Wagons Or Rancheros        For Standard Ride Height  Front Eye Bushings Installed Upgrade the handling and performance of your vehicle with these heavy duty 5-leaf rear springs. This mid-eye spring is designed to maintain the stock ride height. This is the ideal spring for customers who want increased performance but an original look. Because most leaf springs being replaced have sagged considerably you should expect some lift.  More lift is encountered when replacing extremely worn out originals on lighter weight early cars.  We also offer a standard eye version which makes your car sit 1” higher than these springs, which allows for increased wheel/tire sizes. Both options offer superior road handling over stock 4-Leaf designs. They also help prevent wheel hop and spring wrap up on hard acceleration. Another nice feature is they are painted steel-gray to resemble OEM appearance, and to provide a nice contrast compared to traditional black replacements. PLEASE NOTE: New springs take some time to settle after being placed into service.  If you install these do not be discouraged if your ride height isn't perfect at first.  It can take up to one month of driving and being under load to balance out. Learn More
$129.99 ea.
1964-1965 Falcon & Comet Heavy Duty 5-leaf Springs, Pair - Mid-Eye Part # 90-853450-1
Fits 1964 To 1965 Ford  Falcon & Mercury Comet Not For Wagons Or Rancheros        For Standard Ride Height  Front Eye Bushings Installed Buy The Pair And Save Upgrade the handling and performance of your vehicle with these heavy duty 5-leaf rear springs. These mid-eye springs are designed to maintain the stock ride height. They are the ideal springs for customers who want increased performance but an original look. Because most leaf springs being replaced have sagged considerably you should expect some lift.  More lift is encountered when replacing extremely worn out originals on lighter weight early cars.  We also offer a standard eye version which makes your car sit 1” higher than these springs, which allows for increased wheel/tire sizes. Both options offer superior road handling over stock 4-Leaf designs. They also help prevent wheel hop and spring wrap up on hard acceleration. Another nice feature is they are painted steel-gray to resemble OEM appearance, and to provide a nice contrast compared to traditional black replacements. PLEASE NOTE: New springs take some time to settle after being placed into service.  If you install these do not be discouraged if your ride height isn't perfect at first.  It can take up to one month of driving and being under load to balance out. Learn More
$239.99 PR
Fiberglass Rear Bumper Bracket, Falcon, 1964-1965 Part # 90-81973-1
Bumper brackets designed to be used with fiberglass bumpers. These brackets are manufactured of fiberglass themselves, hardware is not included or available separately.64/65 Falcon rear bumper. Learn More

: $269.99 Set

Sale Price: $229.88 Set

23 Item(s) Show per page Grid  List